Gester instrument Co., Ltd. specializes in the production and sales of battery safety testing equipment. There will be customers who ask questions about how to maintain the PLC Automatic Control Battery Extrusion Testing Machine GT-I05. How to maintain the Battery Crush Tester in daily?

The following is the analysis of the correct maintenance method of the Battery Extrusion Test Equipment:

1. First of all, the operator of the Battery Crush test chamber must read the operating procedures and the operating instructions of the equipment, and keep them properly.

2. The battery extrusion tester must be grounded when installed, stable, not tilted, and not shaken.

3. Clean the external dust of the battery extrusion testing machine with dry cotton cloth.

4. To control the ambient temperature, temperature, continuous working time, power supply voltage, etc. of the battery extrusion tester.

5. Pay attention to moistureproof, dustproof and anticorrosion when using the battery extrusion test Chamber. Cover it with dustproof cloth when not in use for a long time.

6. Check regularly to ensure complete equipment, instruments and accessories.

7.Regular Battery Crush Tester power inspection, once found smoke, fire, odor, to immediately cut off the power, report to the management, to prevent damage to the instrument.

8. Regularly maintain the Battery safety Evaluation Extrusion Testing Machine. When a fault is found, it should be eliminated in time or contact Gester, and maintenance records should be made regularly. General large equipment to clean and maintain 2 to 5 times a month.

9. If the fault cannot be eliminated, the technical personnel in the equipment center shall be notified for maintenance, and it is not allowed to disassemble it without permission.